Home Page





 

R8228-5 - IMPULSE WINDING TESTER - NEW -

 






 
Function:
Verification of the quality on electrical windings with control of the absence of short-circuits
Application:
On any kind of winding with a minimum of 10 microHenry inductance
Use:
Laboratory or small productions
Features:
  • Low energy test without damaging the coil
  • 4 kind of waveform comparison methodes
  • Up to 20 MSPS sampling rate
  • Multi-trigger mode programmable
  • Direct display of comparison results
    Technical specifications
  • Output impulse voltage : 500-5000V +/-3% +/-5V
    Voltage control mode
  • Normal : Voltage programmable on terminals when terminals are open
  • Contant : mantains voltage selected across the winding indipendent of changes of the winding impedance
  • Sampling rate : 20MSPS/50nsec - 10MSPS/100nsec
  • Sampling rate : 5MSPS/200nsec - 2.5MSPS/400nsec
  • Sampling rate : 1.25MSPS/800nsec - 625kSPS/1600nsec
  • Sampling rate : 312kSPS/3200nsec - 156kSPS/6400nsec
  • Resolution : 8 bits
  • Sampling points : 960 bytes
  • Input impedance : 10Mohm (resistive voltage divider)
  • Waveform measurement : Voltage, time, frequency
  • Area size comparison
  • Differential area comparison
  • Corona discharge
  • Differential phase comparison
  • Area size repetition accuracy : +/- 1%
  • Differential area repetition accuracy : +/- 1%
  • Detection output : PASS/FAIL display, Alarm
  • 60 groups of standard waveforms can be stored in internal non-volatile memory
  • 800 groups in the USB flash memory (optional)
  • Interfaces: RS232-C, Handler, IEEE488, Scanner
    		•